This diagram illustrates the three different heads (hydraulic, pressure and elevation) for hydrostatic (no flow) conditions. The yellow rectangle represents a sand and water filled tube or column with its top open to the atmosphere and its bottom drained by a pipe or tube (blue line).
Hydraulic head (red line) gradients actually cause groundwater to flow.
Pressure head (blue line) is zero at the top of the column, as designated by the inverted triangle and horizontal lines (showing the water table).
Elevation head (green line) always increases 1:1 with elevation.
Licensing
I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.
If this is not legally possible:
I grant any entity the right to use this work for any purpose, without any conditions, unless such conditions are required by law.
If this file has problems with attribution, copyright, or is otherwise ineligible for Commons, then remove this tag and DO NOT transfer it; repeat violators may be blocked from editing.
Other Instructions
Endorse this file for transfer by adding |human=<your username> to this Template.
If this file is freely licensed, but otherwise unsuitable for Commons (e.g. out of Commons' scope, still copyrighted in the US), then replace this Template with {{Do not move to Commons|reason=<Why it can't be moved>}}
If you think that a local copy of this file should be retained, then replace this Template with {{Keep local|reason=<Why a local copy is needed>}}
This diagram illustrates the three different heads (hydraulic, pressure and elevation) for hydrostatic (no flow) conditions. The yellow rectangle represents a sand and water filled tube or column with its top open to the atmosphere and its bottom drained