Internal standard

Internal Standard

An internal standard is a known quantity of a compound added to a sample to aid in the quantitative analysis of an analyte. The principle of using an internal standard is widely applied in various fields such as analytical chemistry, biochemistry, and molecular biology, facilitating accurate and precise measurements in complex sample matrices. This method is particularly useful in techniques such as chromatography, mass spectrometry, and nuclear magnetic resonance (NMR) spectroscopy.

Principle

The internal standard method involves adding a known amount of a compound, which is chemically similar but not identical to the analyte of interest, to both the sample and the standard solutions. The response of the internal standard is used to calibrate the system or compensate for variations in sample volume, detection sensitivity, and other experimental conditions. By comparing the ratio of the analyte's signal to the internal standard's signal in the sample with that in the standard solutions, the concentration of the analyte can be accurately determined.

Selection Criteria

The selection of an appropriate internal standard is crucial for the success of the analysis. The chosen internal standard should:

• Be chemically similar to the analyte to ensure similar behavior during the analytical procedure.
• Not be present in the sample.
• Be detectable by the same analytical method as the analyte without interfering with the analyte's detection.
• Have a similar response factor to the analyte across the concentration range of interest.

Applications

Internal standards are used in a variety of analytical techniques, including:

• Gas chromatography (GC)
• Liquid chromatography (LC)
• Mass spectrometry (MS)
• Nuclear magnetic resonance (NMR) spectroscopy

These applications span across different industries and research fields, including environmental analysis, pharmaceuticals, forensics, and biochemical research.

Advantages

The use of internal standards offers several advantages:

• Compensates for variations in sample preparation and analysis.
• Improves the accuracy and precision of quantitative analysis.
• Allows for the correction of signal fluctuation due to instrument variability.

Limitations

However, there are also limitations to the internal standard method:

• The need for a suitable internal standard that meets all the selection criteria.
• Potential interaction between the internal standard and the analyte or matrix components.
• Additional steps in sample preparation and analysis.

Conclusion

The internal standard method is a powerful tool in quantitative analysis, providing a means to achieve more accurate and precise results. Its application across various analytical techniques underscores its versatility and importance in scientific research and industry.

Internal standard Resources
Latest articles Most recent articles Ongoing trials	Wikipedia